Sat Jul 09, 2022
Air shower manufacturers in Bangalore
Air Shower is a self contained well built factory assembled designed to deliver a spray of moving air from nozzles transported and virtually can be installed at any site. Absolute filter-fan module provide positive pressurization and filtration down to 99.97% efficiency on 0.3 micron. The Clean Air inside the Shower will support a very high degree of sterility and clean air condition.The system is supplied with optionally aluminium grated floor located approximately 6 inches above datum level. Duct air chassis are installed within the walls of the units. While the system is in operation, both doors will be automatically locked. In the event of power failure or an emergency, the doors get unlocked. Construction is of Mild Steel Powder coated / Stainless Steel 304 grade. Provided with two aluminium framed acrylic / glass door with automatic locking device. Statically/dynamically balanced, blower draws the air through pre-filters and throws it through HEPA filter into the chamber. Suitable to work on 220V, 1 phase 50 Hz, AC supply.
Your clean room environment is shielded from unwanted contamination by Accumax India Air Shower. Due to heavy traffic in the gowning area and throughout the gowning/ungowning process, clean garments become contaminated. When a garment is worn repeatedly or taken on and off multiple times throughout the day, the contamination issue is exacerbated. An efficient way to get rid of this surface contamination is with an air shower. In addition, contaminants will be carried straight to the clean room and deposited on products and clean areas by removing them from the garments' surface. Stainless steel and powder-coated galvanized iron make up the air shower's construction. Stainless steel nozzles that can be adjusted allow air to flow through the units. It is possible for the item to be shipped fully assembled or disassembled. All parts are compatible with a standard door under knockdown conditions. The air shower's top or inside are used to service the blower motor and filters. An air shower is a low pressure, high velocity system that allows for a typical entry and exit from a contaminated area. Concentrated HEPA-filtered air is supplied by air showers in high-velocity jets that remove contaminants while a person stands within or passes through the specially designed air chamber. Pressurized filtered air streams from movable nozzles when the unit is turned on. To guarantee efficient distribution of filtered air, the nozzles are positioned uniformly on the walls and ceilings. By directing contaminated air downward via the air shower's grills and hollow walls, the closed loop circulation design eliminates 99.99% of all particles down to 0.3 microns.
Design and Construction
Clean Room Air Showers are designed in various configurations such as Entry exit type, L type entry exit, one way entry and two way exit type and tunnel and conveyor type etc. We design and construct different types of air shower that includes portable air shower,industrial air shower and air shower tunnel type. If you are unsure which air shower design is workable, our technical team will visits your premise and suggests you appropriate design structure.
Clean room air shower be used in pharma production, micro- electronic fabrications and production units, Semi-conductor production lines, basic and applied science research laboratories,to detect the acidity or alkalinity of the solution.
Air shower Specifications
1 | Dimensions | WxDxH : 900x1000x2000 mm (Inner Area) WxDxH: 1400x1075x2150 mm (Outer Area) Or Customized |
2 | MOC | Galvanized Iron Powder Coated / Stainless Steel 304 |
3 | Blower Assembly |
Dynamically And Statically Balanced Motors And Blowers
|
4 | Motor | Make Eyaani |
5 | Nozzles | Made Of Stainless Steel Rotating And Adjustable Fixed Either Side Of Wall And Top Ceiling Velocity 70 Meters/Sec |
6 | Blower CFM | 25-30 Meters/Sec |
7 | Face Velocity | 20-22 Meters/Sec (3937-4330 FPM) |
8 | Air Flow | 20-22 Meters/Sec (3937-4330 FPM) |
9 | Class | 10000 |
10 | Interlocking of Doors | Interlocking Facility Of Doors, One Door Lock Automatically When Other Is Opened With Electromagnetic Lock, With Timer Setting |
11 | Flooring | Aluminium Checker Sheet Anti Skid Or Stainless Steel |
12 | Door | Frame Made Of Stainless Steel / Galvanized Iron Powder Coated Interlocking Facility, Half Toughened Glass |
13 | Hingle, handle | Make Harrison/Godrej Or Equivalent |
14 | Light | LED |
15 | Prefilter | Washable Prefilter Down To 10 Microns, Particulate At An Efficiency Of 90% Duly Tested |
16 | Hepa Filters | With 0.3 Microns Particulate Of 99.978% Efficiency And DOP Tested, Frame Of Aluminium, Microfiber Glass Media Epoxy Sealed, Non Washable |
17 | Operations | Automatic Actuation Operation And Adjustable Timer Trough Microprocessor Based Controller |
18 | Noise Level | Less Than 75 Db |
19 | Safety | Emergency Switch In Chamber |
20 | Electric Supply | Work On 220v AC 1 Phase Or 3 Phase (To Specify) |
Inner Size: (W X D X H)
Features
Interlocking Doors prevent unnecessary contamination inflow and thereby prevent Cross-Contamination of the Clean Room and the Air Shower. A Power Failure Safety Feature Automatically releases the Doors in the Event of a Power Failure to for Operator Safety. LED Lighting Built Fitted into the Ceiling. In Addition, An Emergency Stop Button is fitted in Air Shower Chamber which Releases the Door Lock For Exiting.
Accumax India offers Air Shower at a fair price and excellent warranty terms.We cover both Indian and internation market.Contact us to get a quote.
Accumax India has been producing a superior range of Clean Room Air Showers in Bangalore for many years. Installed at the entry to cleanrooms and other regulated settings, air showers are independent rooms. When it comes to air shower manufacturers in Bangalore, we are the most reputable name. The following are some of the features of air showers: excellent finish, maximum strength, ease of maintenance, quality tested, robust construction, improved performance, remarkable resistance to corrosion, efficient and effective removal of dust particles.You may keep an area inside that is free from contaminants and dust with the help of our Cleanroom Air Showers. We advise you to position the air showers right in front of your research and testing center or Clean Room entrance.Leading manufacturer of air showers, Accumax India's products are in high demand from both small and major businesses in various industries.
Testing
We conduct rigorous test for our all our air showers. The testing goes on in many phases to check out possible loopholes in functioning and technology framework.The testing phase also involves complying with the certifications for safety and OHS as per the needs of the industry. We also conduct customer needs and industry-specific certifications that help you in providing a fool proof and cleaner room in the area.
Frequently Asked Questions
What does an Air Shower do?
Air showers are specialized enclosed antechambers which are incorporated as entryways of cleanrooms and other controlled environments to reduce particle contamination. Air showers utilize high-pressure, HEPA- or ULPA-filtered air to remove dust, fibrous lint and other contaminants from personnel or object surfaces.
What is air shower design?
Air showers are designed to quickly and effectively remove particulate prior to entering cleanroom. The air shower selection criteria allow for high air-flow volume combined with high nozzle velocity, providing optimal operational power and force.
Can Accumax India cleanroom air showers measure the differential pressure across filter?
Standard models of Air Shower are not designed with a device to measure and display differential pressure across filter. Upon customer's request, Accumax India can customize cleanroom air showers to have add-on magnahelic gauges to display differential pressure value across filters