Biosafety cabinet manufacturers in CHENNAI

Accumax India is a leading Biosafety Cabinet Manufacturers in Chennai, All models of Biosafety Cabinets such as Class II Type A1, Class II Type A2, Class II Type B1, Class II Type B2, Class III are available.

BIOHAZARD SAFETY CABINET Type A-2, Class II

Bio Safety Cabinet Class II Also has An Open Front Design Provided With Negative Pressure Generation Module. This Equipment Provides Recirculation Of Mass Flow Of HEPA Filtered Air.This Type Of Bio Safety Cabinets Provide Excellent Protection To Users, Products And The Environment.

Construction
Bio Safety Cabinet Is Designed To Conform To The United State Federal Standard 209B/BS5295 And Meets The Class 100 Conditions Along With British Standard 5726-Appendix A. Our Units Are Fabricated Of Galvanized Iron Powder Coated/ Stainless Steel. The Side Panels Made Out Of Heavy Plexi Glass Sheets Are Mounted On Anodized Aluminum Frames. The Whole Unit Is Supplied With Manometer To Gauge The Pressure Drop In The Unit While Operation, Beside The Gas Cock, Power Socket Etc

Filter Assembly
Fitted With Fully Washable Synthetic Pre-Filter Units And Secondary High Efficiency Perfect Air Filters Made Of Mini Pleated Non Woven Fabric. The Efficiency Of Our Filters Have A Rating Better Than 99.99% At DOP (Cold) And 99.97% At DOP (Hot). Our Units Have The Capacity To Hold All Suspended Particles Of Size > 0.3 Micron.

Motor And Blower Assembly:
Provided With Perfectly Balanced (Static As Well As Dynamic) Motor And Blower

Illumination:
Illumination At The Work Table By Means Of LED Lights Panel Concealed At The Upper Portion Of The Unit.

Ultra Violet Light Is assimilated In The Illumination Panel Of Our Bio Safety Cabinets To Take Care Of The Sterilization Of The Existing Air Present In The Enclosure, therefore ensuring The High Standard Of Cleanliness In Our Equipment Before the beginning Of Actual Working.

Noise Level:
Our Bio Safety Is Designed To Ensure That The Work Enclosure Has Minimum Possible Vibration Levels And Noise Level Is Also Contained Below 70 db.

Biosafety cabinet class ii, type a2 specification:

Cleanliness	Class 100
Velocity	90 Feet / Min±20
Noise Level	65 Decibels ± 5% On A Scale
Particle Retention	0.1 Micron
Efficiency	99.999 %
Pressure Drop	23 mm Wg
Size-At Exhaust	6”x 6” x 6”
Pre-Filter	Non Woven-Synthetic Polyester
Particle Retention	10 -15 Micron
Efficiency	90%
Pressure Drop	6 mm Wg
Blower Assembly	By 1 No ¼ Hp, Single Phase, 1440 RPM Motor, Directly Coupled With A Pair Of Aluminum Centrifugal Impeller. Capacity 1000 CFM Pressure 30 mm Wg
Exhaust Assembly	By Motor of ¼ HP, Single Phase,1440 RPM Motor, Directly Coupled With A Aluminum Impeller. Capacity - 300 CFM, Ducting By PVC Pipe With 1 No ¼ HP Motor Blower With Rain Guard-Dia –150 mm
Ultra Violet Lamp	Philips/Osram Make
Illumination	LED
Standard Accessories	Pressure Manometer, Additional Power Point Gas Inlet Nozzle, And Floor Levelling Screws, Wire Cord
Power Supply	220 V, Single Phase, 50 Hz
Working Area	W 900 x D 600 x H 600mm W 1200 x D 600 x H 600mm W 1800 x D 600 x H 600mm

BIOHAZARD SAFETY CABINET Type B2 Class II
This Type Of Biosafety Cabinet No Circulation Takes Places Inside Workspace And The Blower Will Exhaust All The 100% Of The Filtered Air.

Construction
Made Of Galvanized Iron Powder Coated / Stainless-Steel Sheet. The Work Zone Having Negative Pressure While A Microprocessor Controls Cabinet Functions. Further, An LCD Panel Is Fitted To Display The Monitoring Of The Cabinet Air Flow And A Blower Run Meter Is There To Track Operating Life.

Illumination
Fitted With Light With Optimal Wattage Ultra Violet Light To Ensure High Level Of Cleanliness Before Operation.

Noise Level
Deliver Extremely Low Noise Level Of Less Than 70 db And Also Provide Minimum Vibration Levels.

Filter Assembly
Equipped With Synthetic Pre-Filter Unit Washable And High-Efficiency Filters (Secondary) That Are Made Of Mini Pleated Hepa Non-Woven Fabric. The Filters Deliver An Efficiency Rating Which Is 99.99% At DOP (Cold) And 99.97% At DOP (Hot). Can Hold All Suspended Particles Of Size More Than 0.3 Micron.

Motor And Blower Assembly
Fitted With Balanced Motor And Blower. The Assembly Comes With The Rating Of ¼ HP.

In Addition To Normal Feature Of Biosafety Vertical Laminar Flow, It Is Provided With Following Unique Features:

100% Exhaust
Sliding Sash - Renders Unit Convertible For Use As A Conventional Vertical Laminar Down Flow Clean Air Work Station
Filtered Exhaust - Protects Ambient Environment, And Avoids Build Up, Air Borne Particles.
Glove Ports And Gauntlets- Permits Working With Medium To High Risk Organisms, Pathogenic Cultures Or That Tend To Aerosolize In Unknown Concentration
Built In U.V. Germicidal Light-Facilitates Sterilization Of Working Area Before And After Use
Cock-For Gas, Air Or Vacuum

Biosafety cabinet Class II, Type B2 Specification:

Cleanliness	Class 100
Velocity	90 Feet / Min±20
Noise Level	65 Decibels ± 5% On A Scale
Hepa Filter	Media Glass Fiber Paper-Imported
Particle Retention	0.1 Micron
Efficiency	99.999 %
Pressure Drop	23 mm Wg
Size-At Exhaust	6”x 6” x 6”
Pre-Filter	Non Woven-Synthetic Polyester
Particle Retention	10 -15 Micron
Efficiency	90%
Pressure Drop	6 mm Wg
Blower Assembly	By 1 No ¼ Hp, Single Phase, 1440 RPM Motor, Directly Coupled With A Pair Of Aluminum Centrifugal Impeller.Capacity 1000 CFM Pressure 30 mm Wg
Exhaust Assembly	By Motor of ¼ HP, Single Phase1440 RPM Motor, Directly Coupled With A Aluminum Impeller.Capacity -300 CFM, Ducting By PVC Pipe With 1 No ¼ HP Motor Blower With Rain Guard-Dia –150 mm
Ultra Violet Lamp	3 Feet, 30 Watt – Philips/Osram Make
Illumination	4 Feet 40 Watt-With Diffusers
Standard Accessories	Pressure Manometer, Additional Power Point Gas Inlet Nozzle, And Floor Leveling Screws, Wire Chord
Power Supply	220 V, Single Phase, 50 Hz
Working Area	W 900 x D 600 x H 600mm W 1200 x D 600 x H 600mm W 1800 x D 600 x H 600mm

Biosafety Cabinet Maintenance

In order to utilise the best use of a Biosafety cabinet and maintain operational integrity, proper maintenance is essential. A Biosafety operator must follow regular cleaning and inspection schedule. As chemicals are extensively used in these Biosafety Cabinets, filter saturation should be checked regularly, if need replace it immediately. Other minor check-ups should be done on regular basis such as air flow, surface cleaning, motor, and lighting and electrical switches etc.

Market we cover

Accumax India is a renowned Biosafety cabinet manufacturers in India. Having factory based in Delhi, the company manufacturers customized Biosafety Cabinets Class II Type A2 and sell them at affordable price throughout India and overseas market including African and Middle East countries.Accumax India has engineers, machinery and knowledge that makes us capable to supply you with your choice of Biosafety cabinet that may vary in dimensions, associated accessories and control points etc. Made of branded parts, these cabinets are highly effective to maintain maximum level of safety; therefore, considered a necessary part of any research purpose.

International Market Cover

Saudi Arabia, Kuwait, Qatar, Oman, Iraq, Baharain, UAE, Malaysia.

Indian Market Cover

Maharashtra, Gujarat, Bangalore, Chennai, Coimbatore, Baddi, Rudrapur, Haridwar, Roorkee, Orrisa, Haryana, Manipur, Andhra Pradesh, Assam, Sikkim, Rajasthan, Meghalaya, Tripura, Tamil Nadu, Arunachal Pradesh, Karnataka, Bihar, Goa, Chhattisgarh, Mizoram, , Nagaland, Jharkhand, Jammu and Kashmir, Uttar Pradesh, West Bengal, Kerala, Punjab, Uttarakhand, Orissa, Madhya Pradesh, etc.

Related Clean Room products