Dispensing Booth specifications

1	MOC	Stainless Steel 304 Grade
2	Working Area	1800x900x1800mm Or Customized
3	Filtration	Triple Stage Filtration
4	Prefilter	Washable Prefilter Down To 10 Microns, Particulate Efficiency Of 90%Down To 10 Micron
5	Hepafilter	Media Glass Fiber Efficiency 99.99% Particle Retention 0.3 Microns
6	Intermediate Filter	95% Down To 5 Micron
7	Air Flow	Recirculating Laminar Vertical Air Flow
8	Cleanliness Level	Class 100
9	Motor Blower	Dynamically Balanced ¼ HP Motor
10	Utility	LED, UV Tube, Magnahelic Gauge, DOP Port, On-Off Switch
11	Noise Level	65 Decibels ± 5%
12	Curtain	Anti-Static PVC Curtains

Accumax India manufactures and supply standard and customized (in terms of functionality and capacities) an exclusive line of Dispensing booth which is a kind of partial purifying equipment for filling, refilling, weighing, and sampling of raw material and compounds.It comes with a HEPA filter, which uses the down-drought technique to stop dust from entering the air. To safeguard both the operator and the environment, the device removes powder pollution.

Pharmaceutical weighing booths and pharmaceutical sampling booths are other names for the dispensing booth.Accumax India Sampling booth comes with two to three validation ports for Pre-filters and HEPA filters. DOP test of dispensing booth must be repeated every 6 months for better functioning of the Sampling booth. Pharmaceutical Dispensing booth is used in the Pharmaceutical Industry in the field of Human Body injectables.

Dispensing Booth Working Principle

Downward Forced air of sampling booth extracts at low level into the booths cleanliness filtration system where contaminated particles are recirculated into the booth Air Flow. In standard Working condition of Pharmaceutical dispensing booth air pulled through the main chamber to steel exhaust grills used to fasten the HEPA & PRE-filters fitted in the rear side of the booths, It suppresses airborne dust particles away from the uses breathing area.

Features

1. Customized design

2. A unique designed air duct effectively controls the noise.

3. Smooth transitions of the wall and ground can eliminate the blind angle.

4. The differential pressure gauge is equipped to real-time monitor the filters.

5. Intelligent control mode and alarm system ensure the reliability of running.

6. An automatic changeable frequency system monitors the air velocity to ensure its stability in the work area.

7. Uniform flow design of the main working area

8. The sampling booth has primary filters, medium efficiency filters, and HEPA filters

Frequently Asked Questions

1.What is the size of dispensing booth?

Dispensing Booth is a kind of partial purifying equipment for filling, refilling, weighing and sampling of raw material and compounds. It is provided with HEPA filter, which prevents the airborne dusts by down draught technique.

2.How many filters are in a dispensing booth?

Dispensing booth is usually made of stainless steel and equipped with three stage filtration (10µ Pre-filter, 310µ Intermediate and 0.310µ HEPA Filter) with the help of motor blower assembly.

3.What are the components of dispensing?

The core components of dispensing a prescription include gathering and analyzing information, presenting options to the patient based on the information gathered, dispensing the medication, and offering follow up as required. Dispensing is comprised of technical and cognitive components.

Related Clean Room products