Wed Apr 03, 2024
Biosafety Cabinet manufacturers in Bangalore
Bio Safety Cabinet Class II has an open front design provided with Negative Pressure Generation Module.This Equipment Provides Recirculation Of Mass Flow of HEPA Filtered Air.This Type Of Bio Safety Cabinet provides excellent protection to users, products and the Environment.
Construction
Bio Safety Cabinet is designed to Conform To The United State Federal Standard 209B/BS5295 And Meets The Class 100 Conditions Along With British Standard 5726-Appendix A. Our Units Are Fabricated Of Galvanized Iron Powder Coated/ Stainless Steel. The side panels made out of Heavy Plexi Glass Sheets Are Mounted On Anodized Aluminum Frames. The Whole unit is supplied With Manometer to Gauge the Pressure drop in the Unit While Operation, Beside The Gas Cock, Power Socket Etc
Filter Assembly
Fitted With Fully Washable Synthetic Pre-Filter Units And Secondary High Efficiency Perfect Air Filters Made Of Mini Pleated Non Woven Fabric. The Efficiency Of Our Filters Have A Rating Better Than 99.99% At DOP (Cold) And 99.97% At DOP (Hot). Our Units Have The Capacity To Hold All Suspended Particles Of Size > 0.3 Micron.
Motor And Blower Assembly:
Provided With Perfectly Balanced (Static As Well As Dynamic) Motor And Blower
Illumination:
Illumination at the Work Table by means of LED Lights Panel Concealed at the Upper Portion Of The Unit.
Ultra Violet Light is incorporated in the Illumination panel of our Bio Safety Cabinets to take care of the Sterilization of the Existing Air Present in the Enclosure, Thus ensuring the high standard of cleanliness In our Equipment before the commencement Of Actual Working.
Noise Level:
Accumax India Bio Safety is designed to ensure that the Work Enclosure Has Minimum Possible Vibration Levels And Noise Level Is Also Contained Below 70 db.
Biosafety cabinet class ii, type a2 specification:
Cleanliness |
Class 100 |
Velocity |
90 Feet / Min±20 |
Noise Level |
65 Decibels ± 5% On A Scale |
Particle Retention |
0.1 Micron |
Efficiency |
99.999 % |
Pressure Drop |
23 mm Wg |
Size-At Exhaust |
6”x 6” x 6” |
Pre-Filter |
Non Woven-Synthetic Polyester |
Particle Retention |
10 -15 Micron |
Efficiency |
90% |
Pressure Drop |
6 mm Wg |
Blower Assembly |
By 1 No ¼ Hp, Single Phase, 1440 RPM Motor, Directly Coupled With A Pair Of Aluminum Centrifugal Impeller. |
Exhaust Assembly |
By Motor of ¼ HP, Single Phase,1440 RPM Motor, Directly Coupled With A Aluminum |
Ultra Violet Lamp |
Philips/Osram Make |
Illumination |
LED |
Standard Accessories |
Pressure Manometer, Additional Power Point Gas Inlet Nozzle, And Floor Levelling Screws, Wire Cord |
Power Supply |
220 V, Single Phase, 50 Hz |
Working Area |
W 900 x D 600 x H 600mm W 1800 x D 600 x H 600mm |
BIOHAZARD SAFETY CABINET Type B2 Class II
In this type of Biosafety Cabinet no circulation takes places inside Workspace and the Blower Will Exhaust All The 100% Of The Filtered Air.
Construction
Made of Galvanized Iron Powder Coated / Stainless-Steel Sheet.The Work Zone having Negative Pressure While a Microprocessor controls Cabinet Functions. Further, An LCD Panel is Fitted to display the monitoring of the Cabinet Air Flow and a Blower Run Meter is there to track operating Life.
Illumination
Fitted With Light With Optimal Wattage Ultra Violet Light to ensure High Level of Cleanliness Before Operation.
Noise Level
Deliver extremely low Noise Level of Less than 70 db and also provide minimum Vibration Levels.
Filter Assembly
Equipped with Synthetic Pre-Filter Unit Washable and High-Efficiency Filters (Secondary) that are made of Mini Pleated Hepa Non-Woven Fabric. The Filters Deliver an Efficiency rating which is 99.99% At DOP (Cold) And 99.97% At DOP (Hot). can hold all suspended particles of size More than 0.3 Micron.
Motor And Blower Assembly
Fitted With Balanced Motor And Blower. The Assembly comes with the rating Of ¼ HP.
In addition to normal feature of Biosafety Vertical Laminar Flow, It is provided with following Unique Features:
Biosafety cabinet Class II, Type B2 Specification:
Cleanliness |
Class 100 |
Velocity |
90 Feet / Min±20 |
Noise Level |
65 Decibels ± 5% On A Scale |
Hepa Filter |
Media Glass Fiber Paper-Imported |
Particle Retention |
0.1 Micron |
Efficiency |
99.999 % |
Pressure Drop |
23 mm Wg |
Size-At Exhaust |
6”x 6” x 6” |
Pre-Filter |
Non Woven-Synthetic Polyester |
Particle Retention |
10 -15 Micron |
Efficiency |
90% |
Pressure Drop |
6 mm Wg |
Blower Assembly |
By 1 No ¼ Hp, Single Phase, 1440 RPM Motor, Directly Coupled With A Pair Of Aluminum Centrifugal Impeller.Capacity 1000 CFM Pressure 30 mm Wg |
Exhaust Assembly |
By Motor of ¼ HP, Single Phase1440 RPM Motor, Directly Coupled With A Aluminum Impeller.Capacity -300 CFM, Ducting By PVC Pipe With 1 No ¼ HP Motor Blower With Rain Guard-Dia –150 mm |
Ultra Violet Lamp |
3 Feet, 30 Watt – Philips/Osram Make |
Illumination |
4 Feet 40 Watt-With Diffusers |
Standard Accessories |
Pressure Manometer, Additional Power Point Gas Inlet Nozzle, And Floor Leveling Screws, Wire Chord |
Power Supply |
220 V, Single Phase, 50 Hz |
Working Area |
W 900 x D 600 x H 600mm |